Liquefied Gas Tank Heating Cable

Silicone heating belt can be used for heating and heat preservation of pipes, tanks, cabinets and cabinets.

Specifications of Silicone Heating Belt:

Voltage: 220V

Power 500-1000W

Temperature adjustment range: 30-200 degrees

Instructions of Silicone Heating Belt:

1. Plug in as required.

2. Hang one end of the heater with three springs (or special wires) on the three gaskets on the other end.

4. Adjust the temperature controller according to the used temperature. The ideal temperature should not exceed 180 ° C.

Precautions of Silicone Heating Belt:

1. Remember not to insert the wrong power supply, use the voltage correctly; do not use a blunt device to scrape the silicone heating film.

2. The heating use temperature is 50-180 ℃. Do not use the temperature too high. The temperature will affect the service life.

3. The surface of the heater needs to be kept dry and clean. Do not have water, oil, or corrosive substances for a long time, which may cause short circuit.

4. Do not use in flammable, explosive gas or workshop occasions!